Makes a great boat sticker
Dimensions 15cm diameter
Available in Red, White, Black, Yellow & Silver
Great for your car but better on your boat
black, red, silver, white, yellow
Step 1. Clean the area thoroughly with rubbing alcohol, acetone or soap and water.
Step 2. Dry the area thoroughly. Use a paper towel to avoid leaving fibres.
Step 3. Apply the sticker to the boat/car. Rub over the backing/masking/transfer tape with the edge of a squeegee or credit card to ensure you have removed all air bubbles. For best results leave for 24 hours before moving to the next step.
Step 4. Gently lift the corner of the backing/masking/transfer tape and slowly peel back at an angle, making sure if necessary, the sticker doesn’t peel off at the same time. If the sticker clings to the backing tape, slowly replace the tape and repeat Step 3.